Get A Free Estimate
How Long Does Pool Resurfacing Take in Orlando? What Slows It

How Long Does Pool Resurfacing Take in Orlando? What Slows It

by | Nov 16, 2026

TL;DR: Pool resurfacing has two stages: crew work while the pool is empty, then a start-up period of about 28 days after it’s refilled. Repairs found after draining, tile and deck add-ons, your finish choice and Orlando’s summer rain can make the empty-pool stage longer. Heaters, salt systems and wheeled cleaners have their own wait times.

How long does pool resurfacing take? Think of it in two stages: the work done while the pool is empty, and a start-up period after it’s refilled. How long the empty stage lasts depends on your finish, repairs, tile work and the weather. The start-up runs about 28 days, but you can often swim before it ends.

Our step-by-step resurfacing timeline walks through each stage in order. This guide looks at a different question: what makes a resurfacing job in Orlando or Winter Park run shorter or longer, and how long you’ll go without full use of your pool.

Which part of pool resurfacing takes the longest?

The start-up after the refill is usually the longest part, not the work on the empty shell. The National Plasterers Council says a new cement-based finish is most likely to stain, scale or discolor in its first 28 days. Its guidance on filling and start-up calls for frequent brushing and daily water testing during that time.

Pebble finishes follow their maker’s rules. Pebble Technology International (PTI) recommends brushing a new pebble finish three times a day for the first three days, then twice a day for the next ten. Its pool care instructions also say to wait about 28 days before judging the final water and finish color, because both change during start-up.

The crew’s hands-on work is the shorter part. The pool is drained, the old surface is prepped, the new finish goes on, and the pool is refilled. Pebble and polished aggregate finishes need one more step before filling: the surface is cleaned and exposed so the stones show.

What makes a pool resurfacing job take longer?

Scope matters most. A straight replaster moves faster than a job that also includes tile, coping, deck work or equipment changes. Each added task is another step before the pool can be refilled.

  • Damage found after draining. Cracks, loose patches of old finish and leak points often show up only once the water is out. They have to be repaired before new material goes on.
  • Finish choice. Marcite is applied and then the pool is filled. Pebble Tec, Pebble Sheen, Pebble Fina and Beadcrete add the exposing step. Your finish and color need to be chosen before the application can be scheduled.
  • Tile and coping. Old waterline tile and coping come off, and new pieces are set before the interior finish is applied.
  • Deck and equipment work. Deck resurfacing, new lights, new jets or a salt system all add work around the pool.
  • Weather. Rain can stop prep and application days. More on that below.

Older pools in established neighborhoods like College Park may have been replastered before. That raises the chance of finding problems under the old surface.

Job scopeExtra work while the pool is emptyWhat most often stretches the scheduleAfter the refill
Marcite (white plaster) replasterSurface prep and new plasterRepairs found after draining, rain on work daysAbout 28 days of start-up care under NPC guidance
Pebble Tec, Pebble Sheen or Pebble Fina resurfaceSurface prep, new finish, exposing the pebblesFinish and color selection, repairs, rainPTI start-up steps, including the brushing schedule
Resurface plus new waterline tile and copingTile and coping removal and replacement before the finishTile selection, coping repairsSame as the finish chosen
Full renovation (finish, tile, deck, equipment)All of the above plus deck and equipment workNumber of tasks, rain on deck daysSame as the finish chosen

How long does pool resurfacing take during Orlando’s rainy season?

It can take longer, because rain mostly hits the days when the pool is empty. Prep, finish application and deck work all need dry weather. The National Weather Service office in Melbourne puts the median start of Orlando’s wet season at May 27 and the start of the dry season at October 15. Summer brings frequent afternoon thunderstorms, and hurricane season runs from June 1 to November 30.

Most Orlando-area pools sit inside screen enclosures. A screen keeps leaves out, but it won’t keep a heavy storm out of an empty pool. If you live in Pine Castle, Meadow Woods or elsewhere in the metro and plan a summer project, leave some room in your schedule. The drier months from mid-October through May usually bring fewer rain days.

Should you add tile, deck or equipment work to the same job?

Often yes, because the pool only has to be drained, refilled and started up once. The trade-off is a longer wait before you can swim. One customer, Nick, described a combined job this way: “They resurfaced my entire pool with amazing pebble tech, dug out and filled planters surrounding my pool, floated my entire pool deck, and painted.”

Pros of doing it all at once

  • One drain and one refill instead of two.
  • One start-up period. Replacing tile later means working around a brand-new finish.
  • Tile, coping and finish colors are chosen together, so they match.
  • Lights and jets are easier to update while the pool is empty.

Cons of doing it all at once

How soon can you swim, heat the pool or run a salt system?

You can usually swim once the pool is full, the water is balanced and sanitized, and brushing no longer stirs up plaster dust. PTI says getting into a filled pool won’t harm the finish, but it advises waiting for those conditions before swimming. Nobody, pets included, should get into the pool while it’s empty or filling.

Heaters take longer. PTI’s start-up sheet says not to use heaters for the first 14 days. The NPC’s start-up paper says to wait 28 days on standard plaster and to follow the manufacturer’s instructions for proprietary finishes. PTI also publishes separate start-up steps for saltwater pools. Under both NPC and PTI guidance, wheeled vacuums and wheeled pool cleaners stay out until after day 28.

This matters in Orlando in the fall. NWS data puts Orlando’s first night below 50 degrees around November 5 in a typical year. If you want a heated pool by a certain date, count back from it: allow for the work on the empty pool plus the heater wait.

Why homeowners choose Classic Marcite for resurfacing

  • We are a family-owned company founded in Orlando in 1988.
  • Our website notes that we have resurfaced over 100,000 pools.
  • We are the largest Pebble Tec applicator in Florida, and we install Pebble Tec, Pebble Sheen, Pebble Fina and Beadcrete.
  • A pebble finish put in by an uncertified installer can void the manufacturer’s warranty.
  • Our crews are our own employees, not subcontractors.
  • A supervisor handles the start-up after the new finish goes in.
  • Our office keeps customers updated on each step of the job.

A customer named Bucky put it this way: “From the initial sale through the fire up at the end everyone was professional, timely and clean.” We work across the Orlando area and to the north, including homes served by our Longwood resurfacing team.

Want a schedule built around your pool, your finish and the season? Book a free resurfacing estimate or call Classic Marcite at (407) 521-6260.

Frequently Asked Questions

Why does a resurfaced pool need to be filled without stopping?

PTI’s start-up instructions warn that stopping the water flow during the fill can leave a waterline mark in the new finish. Plan to keep the hose running until the pool is full.

Can I use my robotic or wheeled pool cleaner after resurfacing?

Not right away. NPC and PTI start-up guidance says to keep wheeled vacuums and wheeled pool cleaners out until after 28 days. Brush vacuums and cleaners without wheels are allowed.

Does a pebble finish take longer to install than marcite?

A pebble finish has one more step before the fill: the surface is cleaned and exposed so the stones show. After the refill, it follows the manufacturer’s start-up steps instead of the general plaster guidance.

Can I resurface my pool during hurricane season in Orlando?

Yes, but expect a higher chance of weather delays on the days the pool is empty. Hurricane season runs June 1 to November 30, and the summer wet season brings frequent afternoon storms.

Recommended Reads

Sources

About Mike Folta
Mike Folta has served the clients of Classic Marcite for more than 15 years. He has 20+ years in the pool industry servicing large hotels and theme parks in the Greater Orlando area, as well as expertly turning backyard pools into an island oasis.