TL;DR: Plaster (called marcite in Florida) costs the least up front and feels the smoothest, but it wears out years sooner than pebble. Pebble Tec costs more, has a natural stone texture, and its maker says it can last more than 20 years with proper care. The right choice depends on how long you plan to keep the pool and who swims in it.
Plaster is the cheaper, smoother pool finish, but it wears out years sooner. Pebble Tec costs more up front and has a textured feel, but it lasts much longer. If you plan to keep an Orlando pool for 10 years or more, pebble usually gives you more for your money. If you’re selling soon or working with a tight budget, fresh plaster still makes sense. This guide to the Pebble Tec vs. plaster pool finish choice is sorted by your plans for the pool, not just by the materials.
What is the real difference between Pebble Tec and plaster?
Both are cement-based coats troweled over the concrete shell. What sets them apart is what gets mixed into the cement. Standard white plaster is a mix of white cement, white marble aggregate and water, according to the National Plasterers Council. In Florida most people call it marcite. It cures to a smooth, bright white surface that makes the water look light blue.
Pebble Tec replaces the soft marble with small, rounded natural pebbles. After the finish is troweled on, the top layer of cement is washed back so the stones show. That leaves a bumpy surface that looks like a riverbed. The manufacturer, PebbleTec, says its original finish uses the largest pebbles it makes. Smaller-stone versions feel smoother. You can read about how Pebble Sheen and Pebble Fina differ from the original if texture worries you.
How do the two finishes compare side by side?
Plaster wins on upfront cost and smoothness. Pebble wins on life span and on how well it resists stains. Here’s how they compare.
| Factor | Plaster (marcite) | Pebble Tec |
|---|---|---|
| Feel underfoot | Very smooth | Textured, like river stones; less slippery |
| Look in the water | Bright, even white; light blue water | Many stone colors; deeper, varied water color |
| Expected life | Shortest of the common finishes | Maker says 20+ years with proper care |
| Upfront cost | Lowest; NPC calls it the most affordable finish | Higher; premium stone and skilled labor |
| Sensitivity to water chemistry | High; changes in water balance damage it | Lower; resists stains and fading, but still needs balanced water |
The life span numbers assume good care. PebbleTec itself says no pool finish can withstand poor maintenance. Around Orlando, a plaster finish typically lasts years less than a pebble finish. Cost depends on pool size, the condition of the old surface, any crack or tile repairs, and the finish line and color you pick. That’s why an on-site estimate matters more than a price you see online.
Plaster pros and cons
- Pro: Lowest upfront cost of any common finish.
- Pro: The smoothest feel on hands and feet.
- Pro: The classic bright white look many buyers expect.
- Con: Shortest life span of the common finishes.
- Con: More likely to stain, etch or turn rough when water chemistry drifts.
Pebble Tec pros and cons
- Pro: A much longer service life, according to the manufacturer.
- Pro: Resists stains and fading.
- Pro: Textured surface gives better grip on steps and benches.
- Con: Higher upfront cost.
- Con: The original texture can feel rough to some swimmers. Also, uncertified installers can void a pebble finish’s manufacturer warranty.
How do you pick between a Pebble Tec and plaster pool finish?
Start with how long you’ll own the pool. Then think about who uses it. Here’s how it usually works out:
- Selling within a year or two: New plaster fixes a rough, stained or peeling surface for the least money, and buyers see a clean white pool.
- Staying 10 years or more: A pebble finish may outlast two plaster jobs. Each resurfacing means draining the pool and losing weeks of use, so fewer of them is a real benefit.
- Inherited an older pool: Have the shell checked first. Cracks, hollow spots and worn tile need repair no matter which finish you choose.
- Young kids or swimmers who spend hours in the pool: Plaster is gentlest on toes. Smaller-stone pebble lines are a middle ground. Quartz is another option, and we cover it in our guide on how quartz holds up against plain plaster.
- HOA, hotel and community pools: These get heavy, year-round use. A longer-lasting surface means the pool closes for resurfacing less often.
Does Orlando’s weather change the answer?
Yes. Our climate favors the more durable finish if you plan to stay. Florida’s sun, heat and year-round swimming wear pool finishes out faster than in places where pools close for winter. PebbleTec notes that harsh sun, heavy rain and changing temperatures all affect how long a finish lasts.
Most Orlando-area pools are concrete (gunite) with a plaster or pebble interior, and many sit inside screen enclosures. The screen keeps out leaves, but it does nothing about heat or rain. Summer storms and hurricane season, which runs June 1 to November 30, can dump a lot of rainwater into a pool in a short time. That throws off the water balance, and plaster takes the hit more than pebble does. That’s true whether your pool is behind an older home in College Park or Winter Park or a newer house in Meadow Woods.
What happens after either finish goes in?
Both finishes need a careful start-up. The pool is drained for resurfacing, refilled when the new finish is done, and then the water chemistry has to be watched closely while the surface cures. For plaster, the National Plasterers Council recommends a 28-day start-up with frequent brushing and daily water testing, and it advises keeping the heater off during that time. It also says proprietary finishes like Pebble Tec should follow the manufacturer’s own start-up instructions. If you want to see how that compares with marcite specifically, read our Florida comparison of Pebble Tec and marcite.
Why Classic Marcite installs both finishes
Classic Marcite is a family-owned company founded in Orlando in 1988.
We are the largest Pebble Tec applicator in Florida.
We also install marcite, quartz, Pebble Sheen, Pebble Fina and Beadcrete, so we can recommend whichever finish fits your pool.
Our crews are our own employees, not subcontractors.
A supervisor handles the start-up after your new finish goes in.
Tom, who handles estimates, walks homeowners through finish and tile choices. One customer, Nigel, wrote that Tom gave advice on tile and surface options, and they chose the pebble sheen finish.
We are licensed and insured, and estimates are free.
Not sure which finish suits your pool? Call (407) 521-6260 or request a free estimate, and we’ll look at your current surface and talk through your plans with you.
Frequently Asked Questions
Is marcite the same thing as pool plaster?
Yes. Marcite is the name Floridians use for standard white pool plaster, a mix of white cement and marble aggregate. It is the smooth, bright white finish found in many older Orlando pools.
Does Pebble Tec feel rough on your feet?
The original Pebble Tec has a natural stone texture that some swimmers notice, especially when they spend a lot of time in the pool. Pebble Sheen and Pebble Fina use smaller stones and feel smoother.
Can I switch from plaster to Pebble Tec when I resurface?
In most cases, yes. A concrete pool with a plaster interior can be resurfaced with a pebble finish once the old surface is prepared and any cracks or damage are repaired.
Who should install a pebble finish?
Use a trained, certified applicator. Uncertified installers can void a pebble finish’s manufacturer warranty, so ask about certification before you sign a contract.
Recommended Reads
- Pebble Tec vs. Marcite: Which Pool Finish Is Right for Your Florida Pool?
- Pebble Sheen vs. Pebble Fina vs. Pebble Tec: Choosing the Best Finish for Your Pool
- Quartz vs. Plaster Pool Finish: Pros, Cons, and What Lasts Longer in Florida